Liquid Bottle Filling Machine

Automatic Volumetric Liquid Bottle Filling Machine

Self lubricating UHMW-PE guide profile for SS slat chain provides low friction wear surface, smooth and noiseless conveying.
Error code display on AC frequency drive on control panel.
Drain tray around machine platform.
Drip tray under the conveyor.
Pneumatic bottle stopping arrangement.
Synchronized two nos. A/c drive for main motor & conveyor belt.
Safety guard for conveyor gear box, motor and pneumatic cylinders.
MCB for over load protection, and prevention against short circuit.
Inbuilt protection against over current, Voltage fluctuation, Short circuit in AC Frequency drive.
+ 1% Filling accuracy on single dose.
No bottle No filling system
Rigid vibration free construction for trouble free performance.
S.S. Elegantly matt finished body.
Elegant and easy control panel for total control on operation.
Minimum change overtime, from one size to another container or fill size.

Production Rate:
120 to 200 Containers/Min		90 to 150 Containers/Min
60 to 100 Containers/Min		30 to 60 Containers/Min
Input Specification :
Container Dia.: 25mm to 90mm		Container Height: 36mm to 300mm
Power Specification :
2 H.P., 3 Phase, 4 Wire System, 50 Hz.
Filling Range :
30 ml to 1000 ml with the help of suitable change parts.
Optional Accessories :
Programmable Logic Control (System) with MMI		Aluminum Profile Cabinet covering full machine
Overall Dimension :
1830mm (L) X 900mm (W) X 1680mm (H)		Net Weight: 650 Kgs Gross Weight: 875 Kgs

All exposed parts are of S.S.304, matt finished to avoid any reflection for achieving the most concentration and efficiency of the operator.
Co-Eccentric nozzles allows very quick and precise setting and making unit compact and manageable.
Crafted S.S. holders, lapped glass as well as S.S. syringes and piston and precision built valve system for achieving very high accuracy in fill size and drip proof performance.Precise setting and accuracy can be easily adjusted on the machine itself.
No vial- No stoppers - No filling system.
Easy reach compact panel provides ease and operation.
Minimum change over time,from one size of container or fill size to another.
Each important individual part required for autoclaving/sterilization can be removed easily. There is no need to shift the whole machine every now and then.
Machine height can be adjusted to match with other machines so as to synchronize with each other efficiently.
Can run dry and wet rubber stoppers and supplied with liquid collecting tray.
Suitable for Food and Beverages, Chemicals, Pharmaceuticals, Cosmetic applications and other allied companies / industries

Filling Heads	2 Heads
Output/ Hour	4000 Vials (Depending on the nature the liquid and its fill size or volume)
Power Characteristics	440v 3 Phase 50Hz 4 Wire System
Input (Container Dia/ Height)	16mm Dia to 50mm Dia/ Height 75mm Max.
Rubber Stopper	13mm/ 20mm (Slotted & Non-Slotted)
Fill (mg.)	0.1 ml to 50ml
Filling Accuracy	±1 % on Single Dose
Infeed Turn Table	450mm
Outfeed Turn Table	450mm
Net Weight	300 kgs
Machine Length	1500mm
Machine width	800mm
Machine height	1400mm

GMP” Model based on advanced technology.
Single Operator for Two Operations.
Less Floor Area -as both the sections driven by one motor.
No Contamination as immediate sealing of filled bottles.
Accuracy ± 1% due to piston dozing principle.
Centralized Volume Adjustment System.
No Bottle No Fill for Individual head, hence no spillages.
Placing of Cap Feeder Outside Monoblock-avoid entering of dust in it.
Fewer Caps in chute automatically stop the Machine.
Rotary cap feeder to avoid Damage of caps during Rotation and Wastage of Energy.
Better finish imported polished, laminated S.S. sheet used.
Electronic liquid level controller and pneumatically controlled control valve.
Drip trays under the conveyor.
Self Lubricating UHMW- PE Guide profile for Low friction wear surface, smooth and noiseless conveying.
Universal Coupling for quick and easy setting of In-feed worm.
Safety Guard for Operation and Protection.